Weltool W3 Tactical Laser Flashlight 200LMS 180000CD 848M

Posted by Supachai ANGKAPRASERT on

Weltool W3 ไฟฉายเลเซอร์ขนาดคอมแพคแบบ tactical ใช้เทคโนโลยี LEP (Laser Excited Phosphor) หลอด LEP emitter ประสิทธิภาพสูงมีค่า output อยู่ที่ 0.22 – 0.25W ความเข้มลำแสงสูงมาก สามารถโฟกัสแสงไปที่วัตถุเล็กในระยะไกลได้ถึง 848 เมตรใน High Mode ที่ 200 lumens 180000 แรงเทียนไม่มีสปิลแสง ความร้อนต่ำ ใช้แบตเตอรี่18650 x 1 ก้อน รันไทม์ได้นาน1.25 ชม. มีแสงขาว และแสงเขียวเหลืองให้เลือกใช้ตามความต้องการ

 

Weltool W3 เหมาะสำหรับเจ้าหน้าที่ทหาร ตำรวจ หน่วยดับเพลิง กู้ภัย การตั้งแค้มป์ เดินป่า การสำรวจเส้นทาง หรือค้นหาหาวัตถุจากระยะไกล

 

 

 

อุปกรณ์มาตรฐาน:
  • Weltool W3
  • ฝาครอบเลนส์(Opaque Lens protector)
  • โอริงสำรอง
  • Weltool FH5 Tactical CORDURA Flashlight Holsterซองไฟฉายคาดเอวคุณภาพสูงตัดเย็บอย่างประณีตผลิตจากผ้าCORDURA® fabric
  • XTAR li-ion Battery18650 3500mAh 3.6V 12.6Wh ใช้เซลล์ของPanasonic-Sanyo NCR18650GA จ่ายกระแสไฟต่อเนื่องที่10A PCB Protected อายุการใช้งาน500 รอบการชาร์จ
  • การรับประกันสินค้า: Limited lifetime warranty ภายใต้เงื่อนไขการรับประกันของผู้ผลิต

Runtime:

ระยะเวลาการใช้งานในแต่ละโหมดทดสอบกับWeltool UB18-35 3500mAh 18650 rechargeable lithium-ion battery

  • Low: 50 lumens 45,000cd แสงพุ่งไกล424 เมตรใช้งานต่อเนื่องได้นาน2.50 ชม.
  • High: 200 lumens 180,000cd แสงพุ่งไกล848 เมตรใช้งานต่อเนื่องได้นาน1.25 ชม.

 

คุณสมบัติ:
  1. ใช้หลอด LEP Emitter: ความยาวคลื่นแสง 400-700 nanometers ให้มุมแสงที่ 3.1° อายุการใช้งาน10,000 ชม.
  2. มีค่า power output อยู่ที่ 0.22 – 0.25W ใน High Mode ให้พลังแสงที่มีความเข้มข้นสูงลำแสงพุ่งไกลถึง 848 เมตรใช้เลนส์คุณภาพสูง Acrylic lens เคลือบแข็งเคลือบโค๊ทสองด้านป้องกันรอยและลดแสงสะท้อนให้แสงผ่านได้ 98.5%
  3. ผลิตจากอลูมิเนียมอัลลอยเกรดอากาศยาน (Aerospace aluminum alloy, black hard anodization) กันสนิม
  4. ออกแบบกันน้ำIP67 ด้วยยางโอริง2 ชั้น (Double O-ring protection)
  5. ระบบขั้วสัมผัสใช้สปริง2 ด้านเคลือบทองนำไฟฟ้าได้สูงสุดรองรับแรงกระแทกที่ความสูง1 เมตร
  6. มีระบบป้องกันการใส่แบตเตอรี่กลับขั้ว
  7. ออกแบบวงจรประสิทธิภาพสูงไม่ใช้ PWM (Pulse Width Modulation) อุปกรณ์ทำงานปราศจากเสียงสัญญาณรบกวน
  8. มีฝาครอบเลนส์ (Opaque Lens protector) เป็นอุปกรณ์มาตรฐานป้องกันเลนส์ป้องกันแสงพุ่งออกมาจากการเปิดไฟฉายโดยไม่ได้ตั้งใจ
  9. ฝาท้ายนิรภัย (safety tail Cap) ออกแบบรองรับความปลอดภัยในขณะที่ใช้งานเมื่อหมุนเกลียวฝาท้ายออกระบบจะตัดการทำงานทันทีและระบบจะทำงานต่อเมื่อหมุนเกลียวกลับเข้าที่เดิม
  10. ระบบสวิตช์ท้าย (Tail Switch) ออกแบบรองรับการกดเปิดปิดได้ถึง 50,000 ครั้งปรับการใช้งานได้ 3 โหมด Low-High-Strobe ไฟฉายจะเริ่มการทำงานที่ Low Mode แตะสวิตช์ครึ่งทางเพื่อเปลี่ยนโหมดกดคลิ๊กเพื่อล็อคโหมดการทำงาน
  11. มีระบบป้องกันการ Over-discharge ของแบตเตอรี่ระบบจะส่งสัญญาณกระพริบไฟ 2 ครั้งเพื่อเตือนให้เปลี่ยนแบตเตอรี่เมื่อปริมาณกระแสไฟต่ำกว่า 30% และจะปิดระบบการทำงานภายใน 5 นาทีหลังจากสัญญาณเตือนครั้งแรก
  12. ขนาดและมิติ: φ ส่วนหัว33 mm  X φ ลำตัว 25.4 mm X ความยาว 155 mm น้ำหนัก 172.5±0.5 กรัม (ไม่รวมแบตเตอรี่)
  13. มีหมายเลข serial number กำกับผลิตภัณฑ์ทุกชิ้น(Individually serialized)
  14. มาตรฐาน CE, RoHS, WEEE, FCC, FX

 

คำเตือนในการใช้งาน:
  1. อุปกรณ์จัดอยู่ในประเภท Laser hazard classification: Class 3B, “Warning” ที่อาจมีผลกระทบกับสายตาและการมองเห็น ลูกค้าควรอ่านคู่มือการใช้งานเพื่อความปลอดภัย
  2. ใช้งานอุปกรณ์ด้วยความระมัดระวังและปิดฝาครอบเลนส์เสมอเมื่อไม่ได้ใช้งาน
  3. ห้ามส่องแสงเลเซอร์เข้าตาภายในรัศมี160 เมตร ความเข้มของแสงแสงอาจมีผลกระทบต่อสายตาได้
  4. ห้ามใช้อุปกรณ์ส่องเครื่องบิน แสงเลเซอร์อาจก่อให้เกิดแสงสะท้อนในชั้นบรรยากาศได้ถึงระดับเพดานบิน 3.5 กิโลเมตร
  5. ห้ามใช้อุปกรณ์ส่องผิวหนัง หรือวัตถุในระยะใกล้ อาจก่อให้เกิดอันตรายจากความร้อนได้
  6. ศึกษาข้อมูลเพิ่มเติมเพื่อความปลอดภัยในการใช้งานได้ที่:  https://www.lasersafetyfacts.com/3B/

 

Ordinary is the repetition of the same; Progress is the revolution of the concept into a new era! In Jan. 2018, Weltool shocks the world with the First White Laser Illumination Tool, worldwide! Disruption in the age of LED illumination!  Weltool stands as the industry leader of innovations, creating an extraordinary future!

Weltool White Laser starts by focusing blue laser beams on a layer of fluorescence, initially emitting yellow fluorescence; this, combined with the remaining blue laser, creates the target white laser beam.  The Weltool W3, "The Featherless Arrow", leverages this technology as its core to create the white laser illumination. Since yellow fluorescence is a wide spectrum light, the white laser created from it is also a wide spectrum light.  This is the technology at the core of not just Weltool Laser, but all laser illumination technology, bringing lamp life in excess of 10,000 hours.

The research team behind this remarkable light technology hails from the world famous Tsinghua University.  This breakthrough work fully resolved the Fluorescence Thermal Quenching issues, enabling the Fluorescence to fully withstand the high frequency laser activation and continuously emit bright light.  Currently there are over 120 total technology patents, over 70 innovation patents, 1 international PCT, and 10 licensed patents.

The Weltool W3 uses an extremely focused laser beam to activate its Fluorescence, all the light created from the activation will be focused to one tiny originating spot as an extremely tight focused beam, further transformed into a blinding pillar of light by a special reflector and lens system.  Ergonomically designed with 155mm long and 1 inch diameter body, sporting a 180,000 Candela beam and a distance of up to 848 meters!  There are two levels of output to choose from with an additional strobe function.  The Weltool W3 is designed from the ground up as a specialized tactical flashlight.

"The Featherless Arrow" – A shot to shatter the darkness!

 

Specifications:
  • Material: Aerospace aluminum alloy, black hard anodization (HA)
  • Reflector: Acrylic lens
  • Emitter Angle: 3.1 Degrees
  • Emitter: Custom LEP module, 400-700nm, with lifetime up to 10,000 hours
  • Emitter Power: 0.22 – 0.25W in High mode
  • Output (tested with Weltool UB18-35 3500mAh 18650 rechargeable lithium-ion battery, outdoor, constant on, below 25 degrees Celsius):
  • High: 180,000 Candela, 848 meter beam distance, 200 lumens, 1 hour 25 minutes runtime
  • Low: 45,000 Candela, 424 meter beam distance, 50 lumens, 2 hours 50 minutes runtime
  • Battery: 1 x 18650 rechargeable lithium-ion battery (not included)
  • Switch: Tail switch, up to 50,000 presses
  • High efficient circuit, with no PWM or operation noise
  • Reverse polarity protection
  • Over-discharge protection
  • Hardened glass lens with double coating
  • Squared threads for wear resistance
  • Gold plated contact springs
  • Impact tested to 1 meter drop distance
  • Double O-ring protection, water resistance up to IP67
  • Individually serialized
  • Dimension: (Bezel) 33 mm, (Body) 25.4 mm, (Length) 155 mm
  • Weight: 172.5±0.5 gram (w/o battery)
  • Included accessories: Lens protector, extra O-rings
Instructions:
  • Open the tail cap twisting counter-clockwise, insert a fully charged 18650 rechargeable lithium-ion battery with the positive terminal toward the head bezel.  Tighten the tail cap twisting clockwise.
  • This light has reverse polarity protection against incorrectly oriented battery.  If the flashlight does not turn on, please check immediately if the battery is inserted correctly.
  • Once the battery has been inserted:
  • Press tail switch once to turn ON, this will default to LOW mode.  Release the switch at any time to turn OFF, or
  • Press tail switch again (twice) to switch to HIGH mode, and
  • Press tail switch one more time (three times) to switch to STROBE mode.  By repeating the press, the stages of LOW-HIGH-STROBE will cycle until the switch is released, or
  • Press the tail switch until it clicks in any stage to lock in the current mode for CONSTANT ON
  • Click the tail switch again to turn the flashlight OFF.
  • After the flashlight has been turned off for 3 seconds, the next activation will return to low mode by default.
  • The flashlight will flash twice as the battery's capacity becomes too low, please use a new battery when the warning flash begins.
  • After the first flash, the flashlight may have up to 5 minutes of illumination remaining.  After 5 minutes, the flashlight may turn off automatically.

 

Caution:
  • Unauthorized disassembly may damage the light and void the warranty.
  • The light will increase in surface heat during use, recommended use is outdoors in a well ventilated area with ambient temperature under 25 degrees Celsius and the wind speed exceeds 5m/s.  When the light is uncomfortable to hold due to increased heat, please turn the light off until it cools down.  If used indoors, it is recommended to be used for no more than 10 minutes each time and allow the light to cool down between uses.
  • Please swap out the O-rings regularly to maintain the water resistance level.
  • Lubricate the threads with professional grade lubricant regularly.
  • Maintain and keep clean any contact surfaces of the flashlight with alcohol swab.  This may prevent irregular flashes during use.  
  • Remove batteries during storage.  Keep lithium-ion batteries charged approximately every 4 months.
  • This flashlight may not be used as a diving light.
  • Do not aim this light directly at eyes or exposed skin to prevent injuries.
  • Keep this flashlight out of the reach of children.

 

Please visit the URL for further reference of SAFETY : https://www.lasersafetyfacts.com/3B/

 

WARNING: 

  • This light uses a high efficiency LEP emitter, with power output between 0.22 – 0.25W, classified as a Type IIIb laser device.  Please use in accordance with applicable laws and regulations. By using this device, you certify you have read the included "Laser Safety" warnings and release the manufacturer and retailers from all liabilities.
  • The tail cap acts as a "safety key" and must be kept safe.  The tail cap switch can shut off the light immediately or by twisting off the tail cap as a safety back-up.  An opaque lens protector is included as a standard accessory.  Equipped properly, this protector will prevent any light from escaping the front of the flashlight as a safety device.
  • DO NOT aim at another person.  DO NOTaim at mirrors, glasses or other reflective surfaces.  DO NOT aim at aircraft or vehicles in operation.

 

Get to know LEP:

LEP: Laser Excited Phosphor.

Weltool LEP starts by focusing blue laser beams on a layer of fluorescence, initially emitting yellow fluorescence; this, combined with the remaining blue laser, creates the target white laser beam.  The Weltool W3, “The Featherless Arrow”, leverages this technology as its core to create the white laser illumination. Since yellow fluorescence is a wide spectrum light, the white laser created from it is also a wide spectrum light.  This is the technology at the core of not just Weltool Laser, but all laser illumination technology, bringing lamp life in excess of 10,000 hours.

The research team behind this remarkable light technology hails from the world famous Tsinghua University.  This breakthrough work fully resolved the Fluorescence Thermal Quenching issues, enabling the Fluorescence to fully withstand the high frequency laser activation and continuously emit bright light.  Currently there are over 120 total technology patents, over 70 innovation patents, 1 international PCT, and 10 licensed patents.

The Weltool W3 uses an extremely focused laser beam to activate its Fluorescence, all the light created from the activation will be focused to one tiny originating spot as an extremely tight focused beam, further transformed into a blinding pillar of light by a special reflector and lens system.  


Older Post Newer Post


0 comments


Leave a comment

Please note, comments must be approved before they are published